Carburator cable with 7.5 outboard

Ask Questions about Glow Plugs, Paint, Mounts, etc. here.

Moderator: SteveM

Carburator cable with 7.5 outboard

Postby Alex Ladjimi » Wed Jun 17, 2009 9:09 am

I just rebuilt an old boat and I am having difficulties with the cable going from the servo to the carburator. It does not seem to work all that well. At this time I am only testing my work on the boat and the steering cable is operating fine. I have searched the internet for any form of answer with no luck. I am currently using a bicycle cable connected form the servo to the carburator..... Help
Alex Ladjimi
Posts: 1
Joined: Wed Jun 17, 2009 7:09 am
Location: Maine

Postby MECOA » Thu Jun 18, 2009 8:31 pm

you must use the inner and outter cable like a bike cable to connect to the throttle. The outter housing must be hels in place at the engine and near the serco. That way the throttle setting will not change when the engine is steered.

See this item
Site Admin
Posts: 1095
Joined: Mon Jun 30, 2003 9:48 pm

Return to K&B/MECOA Accessory Questions

Who is online

Users browsing this forum: No registered users and 0 guests