identify old motor need to get parts

Just the boat engine stuff here

Moderators: Frank Klenk, SteveM

identify old motor need to get parts

Postby Chris H » Sun Dec 16, 2012 6:57 pm

Ok i have some cars and did have a boat. I took the motor off the boat it is locked up and i want to rebuild i dont know what motor it is but i took it apart
Chris H
 
Posts: 2
Joined: Sun Dec 16, 2012 6:47 pm
Location: oklahoma

Postby Frank Klenk » Sun Dec 16, 2012 7:25 pm

Chris

Can you post a picture of it? We need to see it from all angles. Let me know if you have problems with the picture.

Frank
Frank Klenk
 
Posts: 427
Joined: Sun Jan 05, 2003 7:03 pm
Location: Tillsonburg, Ontario, Canada

motor

Postby Chris H » Sun Dec 16, 2012 9:29 pm

i couldnt get the pix to show up but this is on the motor (AOO11858)
Chris H
 
Posts: 2
Joined: Sun Dec 16, 2012 6:47 pm
Location: oklahoma

Postby Frank Klenk » Mon Dec 17, 2012 4:12 pm

Chris

Email me some pictures. Email link is in my post at the bottom.
Frank Klenk
 
Posts: 427
Joined: Sun Jan 05, 2003 7:03 pm
Location: Tillsonburg, Ontario, Canada

Postby Frank Klenk » Tue Jan 01, 2013 7:56 pm

Chris's engine pictures ...

Image

Image

Image
Frank Klenk
 
Posts: 427
Joined: Sun Jan 05, 2003 7:03 pm
Location: Tillsonburg, Ontario, Canada

Postby SteveM » Wed Jan 02, 2013 4:27 am

Looks like the power head from a K&B 7.5cc outboard.
SteveM
 
Posts: 242
Joined: Mon Nov 20, 2006 10:33 am
Location: Ottawa, Ontario, CANADA

Postby Frank Klenk » Wed Jan 02, 2013 7:50 pm

Steve

Are parts available for this? Chris needs bearings and he mentioned a rebuild kit but not sure what he needs as far as a kit is concerned.
Frank Klenk
 
Posts: 427
Joined: Sun Jan 05, 2003 7:03 pm
Location: Tillsonburg, Ontario, Canada

Postby SteveM » Thu Jan 03, 2013 4:29 am

What parts are needed and have you checked with MECOA first on availability? Bearings can be bought almost anywhere and Boca Bearings is a good source. There are two in the nose piece and also two in the PTO if I remember correctly.

The front bearing is new part number 18-8778 and stock is available
The rear bearing is new part number 18-8781 and stock is available
The PTO bearings are new part number 18-8446 and stock is available

A complete and assembled PTO with bearings and drive plate is 21-8754 and stock is available
SteveM
 
Posts: 242
Joined: Mon Nov 20, 2006 10:33 am
Location: Ottawa, Ontario, CANADA


Return to Marine Engine Topics

Who is online

Users browsing this forum: No registered users and 6 guests

cron